Showing posts with label E36. Show all posts
Showing posts with label E36. Show all posts

Wednesday, May 2, 2012

100. Low and slow baby! Suspension and celebration!

About 6 months ago, my steering wheel started shaking when I was doing approximately 100-120 km/h in a left hand turn. I took it to a mechanic, one I really trust, and he told me to park it up, or I'll lose a wheel... huh.
One of the tie rods was completely bust. At that point, I decided to do a complete overhaul of my front end.
I went on eBay, and I bought this:


It costed me 116€ - that's about 150-155 USD. That's what I call a good buy. Of course, everyone was (still is, probably) skeptical about the quality, but I've covered about 20k km already with these parts, and everything still seems like new. If anyone wants to know where I found this kit - here's the link:

Here's my car floating in mid air:

Right, at that point, I also decided to 'drop' my car. So, we installed Vogtland springs that I already had.
(You can read about them here: 73. Suspension and brakes on my E36 318is)
Here's a couple of shots taken on the way home:


Sorry about the bad quality... I soaked my camera while washing the car :)

And, a little celebration note...

This is my 100th post on this blog! Yeey! And, I still have quite a lot to share :)
Thank you all for reading and especially commenting! :)


Wednesday, March 23, 2011

83. My E36 316 service and brakes upgrade

Since I like to drive my 316i without worries, I did the regular oil service.
It's 13000 kilometers from the last one, so I thought it was time for some new oil, oil filter, spark plugs... I drove to my friends to do the job. The service was done in matter of minutes... I didn't even get a chance to finish my Red Bull. :o)



Right... A few days after that, my front brakes started producing some horrible tunes... :( I thought I would just replace the pads... but no. The pads were 110% worn, and the discs - well, they were even worse.

One thing always bothered me with the 316. The front discs were single-piece, not vented. Meaning, the brakes would quickly fade after just minutes of spirited driving.

Luckily, I had some 325 discs, calipers and pads lying around the garage, so I decided to go for a upgrade. The job is pretty straight-forward, since everything is plug and play. :)

Here's a picture of the 325 disc mounted on my 316:


If you like, I can make a picture of the old pads and discs... :o)
Just leave a comment. :)

Some stuff that you'll probably need for a oil/brake service:


P.S.
This is the filter that I use - Great stuff:
(make sure that you get the correct one for your engine)
. 

Saturday, January 22, 2011

81. E39 to E36 Steering wheel retrofit DIY

Well, I got tired of my steering wheel... And, I found a nice wheel from a E39... so, this was kind of expected:

My old wheel:

Removing is simple. First, disconnect the battery. You don't want that airbag blowing into your face. And, you certainly don't want to see that pesky air-bag light on your instrument cluster. Wait for about 30 minutes for the system to discharge. Unscrew the torx bolts that are in the back of the wheel. Torx 30 should do the job. Take the air-bag gently off the wheel. Unscrew the central bolt (16 mm socket) that holds the steering wheel, and disconnect the two connectors. Pull the wheel towards you, and that's it.


This is the E39 leather, 3 spoke wheel that I installed. It's like new. :)


Installation is reverse of the removal.


Well, I had to take it out a couple of times, to center it, but it wasn't that hard... :)

79. Go-Drift.com Grobnik SNOW track-day

Somehow, I decided to take my E36 daily driver (1.6L engine) to a track day.
The weather forecast was promising snow, and that meant that I had some chance to have fun on a real race track. Well, I know I don't have a LSD on my daily driver, but that didn't bother me much. I wanted fun, not record-breaking performance. :)

The night before the track day, I decided to mount a bucket seat into my E36. That's because I didn't want to find myself flying around the car, while drifting. (If I can call it that)... :)

So, here's a picture of the seat mounted...



The mounting process was really straight-forward. The mounts were already made to fit an E36, so I practically had to take 4 bolts out, replace the seat and put the bolts back on. Well, so I thought. Somehow, when I wanted to test-drive my 'upgraded' E36, I found out that I forgot about the seat-belt buckle. Original seats have them mounted at the side, but bucket seats don't. After a minute, I decided to take the rear-seat, central buckle and mount it to the racing seat. Well, it worked. But that meant I had to take the seat out again, mount the buckle, and put everything back in the car.

Moving on. The next morning, I woke up and saw that the snow was really there. :) But, I didn't expect THAT much snow. Well, here are a couple of pictures of my trip to the race track:








Well, I don't really have to tell you that I had so much fun driving on a snowy road... And, the whole 60 miles of it were completely empty! It was sideways all the way! :)

...

When I came to the track, I saw this:
The access road to the pits wasn't plowed. :( And, I was the first to arrive... Well, there wasn't really much to do, except to wait...

And then, other enthusiasts started to show up:







We decided to make our own road to the pits... A couple of 4x4's went ahead, and made way for our little RWD machines... But, it didn't go smooth as we planned. Our little (mostly BMW) convoy stopped every 200(or so) meters, to dig someone out... :) Team work all the way! :)


  






Well, finally, here are some shots of the track, and cars that were there. Unfortunately,  there was too much snow to have fun in our BMWs... But, it was a really great day, nonetheless.










This beauty had to sit this one out:


Wow! I realized it's already 2011! Huh... how time flies... it feels like I started this blog yesterday... :)

Wednesday, October 6, 2010

76. Drift car dashboard

This is how my drift car's interior looked when I bought it:
Not pretty... I know.

 

That's why I pulled out my tools... (check out the wall decoration) ;)

And, the dash is starting to look better:

I'm still working on it, but this is how it'll look...

74. Breaking into a locked E36

Well, my friend locked his keys (all three of them) into his E36. And, to top it off, the car was running.
Don't ask me how he managed to do it... :) LOL!

Well, we had to break in.

And, after 15 phone calls to various BMW technicians, we decided to do it our way:

Shady characters:

Let's try the hammer:

No go. Let's try something bigger:

Finally - we're in...

If you do this in front of your neighbor's house - don't forget to clean the mess:

We broke the window, because I have 5 sets in stock:

 Yea, this one will fit nicely:

Damn! Who's gonna clean this mess?