Monday, April 30, 2012

99. Installing rear sunblind in a BMW E36 sedan

Original BMW rear sun blinds are quite rare, especially in sedans. I was hunting for one for almost a year. And, in the end, I got one for free, from a forum member here in Slovenia. It's almost a month now, and I still can't believe it. He really made my day nicer - no, not day - probably the whole year. And, the rear rolo is now probably my favorite part in the car.

Well, the rear blind came together with the rear shelf, but without the small pins that hold it open. I ordered those from BMW, and I paid about $20 for pair. Here are the part numbers: (found on bmwfans.info)
  • Hook left: 51 16 1 977 027
  • Hook right: 51 16 1 977 028
  • Supplementary set sun blind: 82 11 9 400 664

P.S. You can still buy the whole thing at your dealer. They don't have the retrofit set any more, but it's still available as separate parts.

If you don't buy it with a pre-cut rear shelf, you can cut your own shelf, and install the rear sun screen rolo without any trouble.

So, here's how my installation went...

I got my hooks and some plastic clips from BMW:


Then, I had to remove my rear bench and rear headrests. If you need more info on removing rear headrests, check out my last post! After that, remove the rear reading lights, c-pillar covers and the plastic trim around the seatbelts. Using a 16mm socket wrench, unbolt the seat belts at the bottom of the seat. Take care how things were assembled, so you'll put everything back in the way it was. Here's how everything looks when you take it all apart:





To fit a shelf with a sun blind rolo, you'll have to take out the foam that was under your regular shelf. Install everything the same way you took things out. Reverse order, naturally. In the end, you have to put those little hooks that will hold the sunscreen open. I couldn't find any instruction on how to mount them, and they really look weird... I thought I would have to take the roof lining off or something. But, no - they just slide in onto their spots... Between the roof lining and the roof, there are small grooves, or small metal slots or something. You can feel them with your fingers. And you just slide the hooks in between the roof and lining. Hopefully, you'll get the idea from the pictures:




And that's it. Put everything back in, and you have a nice piece of OEM equipment that's quite rare and hard to find. Here's two more shots of the completed project:


3 comments:

  1. Hello! Is those hooks should be adjustable? But my left side is very loose . Thank you

    ReplyDelete
    Replies
    1. The hooks should fit tightly into the spots - there are small grooves where the hooks go. And, when you push them in, they should click into place.

      Delete
    2. But why my left side is loose , the only way to fix that, is to pull right hook out a little bit. Or there is some way to ajust the sunblind? Thank you

      Delete